MuseuM Services Corporation Logo

Menu:




MUSEUM SERVICES CORPORATION
385 Bridgepoint Way
South Saint Paul, Minnesota 55075
USA

Phone: (651)450-8954
Fax: (651)554-9217
E-Mail: info@MuseuMServicesCorporation.com

Lascaux Products

You can now buy our supplies online. Click here and you will be directed to our store.

Lascaux Adhesive 303 HV

Lascaux Adhesive 303 HV

Lascaux 303 HV is a water dispersion of butyl methacrylate copolymer and thickened with butyl polyacrylate.

303 HV is the replacment for the discontinued 360 HV formulation. Like 360 HV, 303 HV is able to be thinned in water, but is not reusable or dispersable in water after drying. It has a slightly stronger bond strength and is also slightly more soluble in organic solvents. 303 HV films are soft, tacky and elastic. 303 HV is extremely elastic and the dry film remains permanently elastic. It can be used as a contact adhesive when doing hot seal linings.

F4030-0011 liter $78.00
F4030-0055 liters $370.00

Lascaux Adhesive 498HV

Lascaux Adhesive 498HV

Adhesive 498HV is also a water dispersion of a butyl methacrylate copolymer thickened with butyl polyacrylate, but in the case of 498HV, the basic copolymer is a bit harder and slightly less tacky in the dry film. The dry film is elastic, hard and not tacky. 498HV is soluble in acetone, toluene, and xylenes, but not soluble in Stoddard Solvent, mineral spirits, or naptha. It is most suitable for wet or dry (solvent reactivated) linings.

Warning: It is not advised to ship this product during winter months, due to concern about freezing.

F4032-0011 liter$78.00
F4032-0055 liters$370.00

Lascaux Adhesive 498-20X

Adhesive 498-20X is the same product as 498HV except that it is thickened by the addition of 20% xylene to the water dispersion of butyl methacrylate copolymer rather than with butyl polyacrylate.

F4034-0011 liter$60.00
F4034-0055 liters$220.00

Lascaux Fix, 12 oz. Spray

Lascaux Fixitiv Spray

A solution of Paraolid B-72 in a mixture of toluene and ethyl alcohol packaged in 12 oz aerosol spray cans. This acrylic sealer is as clear as water, non-yellowing, resistant to aging and non-matte. Lascaux fixatives B-72 Thermoplastic acryloid acrylic contains no fluorocarbons.

F4038-01212 ounce (350 milliliter) spray$27.95

Lascaux Textile Weld Powder

Consists of Nylon 12 powder with a melting point of 80°C. It is used for the repair of torn or cut textile fibers and tears or slashes in painting canvas or leathers. Packed in bags of 100 grams of powder.

F4039-100100 grams $16.60

Lascaux Hydrosealer 750

Lascaux Hydrosealer 750

Hydrosealer 750 is a water dispersion of fine pure acrylic resin. The solids content of the dispersion is 30% and the pH is 9-10. Hydrosealer 750 is used as an impregnation sealer for the consolidation of crumbling grounds. It is also used for the consolidation of loose paint layers, cracked or chipped paint.

Discontinued by Manufacturer, Limited Stock available.

F4040-0011 liter$70.00

Lascaux Medium for Consolidation

F4035-500500 ml$60.00
F4035-0011 liter$108.00


< Back to Coatings
Copyright ©2016 BUTLER ACQUISITIONS LTD. All rights reserved.
About Us. Contact Us. Site Map. Terms and Conditions. Disclaimer.